Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Renault Modus.

Model: Renault Modus MK 1 - Years 2004-2013
Part: Headlight bulb

Today's instructions will allow us to dismantle and replace the headlight bulb of the Renault Modus. First, let's open the car's hood and start removing the bumper; to do this, we need to unscrew all the fastening screws found at the top and bottom of the bumper, as well as on both sides of the front wheel arches, as shown in the video. At this point, we unscrew the screws of the headlight assembly, disconnecting the electrical connector to remove it; we then remove the plastic cap and replace the dipped beam bulb with a new one (with an H7 fitting).

Posted on 3 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change a Headlight Bulb on a Renault Modus?
How to Change a Headlight Bulb on a Renault Modus?
Renault Modus (2004-2013 / MK 1) This video shows how to replace a headlight bulb on a Renault Modus. Open the bonnet and locate the back of the affected headlight. Remove the rubber…
Replacement of the front headlight bulb of the Renault Modus
Replacement of the front headlight bulb of the Renault Modus
Renault Modus (2004-2013 / MK 1) Today's steps will show us how to disassemble and replace the headlight bulb of the Renault Modus, following the instructions below. First, we open t…
How to replace the front headlight bulb of the Renault Modus
How to replace the front headlight bulb of the Renault Modus
Renault Modus (2004-2013 / MK 1) Replacing the headlight bulb of the right front headlight of the Renault Modus is a fairly simple operation to perform independently. Before carrying…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos