|
Do it yourself
| |||
| ||||
How do you reset the tire pressure warning light on the Renault Megane?
Model: Renault Megane
Megane 3, Megane III
- Years 2008-2015
It will be possible to completely turn off the tire pressure warning light that appears on the instrument panel of the Renault Megane by inflating the tires to the recommended pressure value: this value will be indicated on the sticker that is affixed to the driver's door pillar. Once the inflation has been done, it will be possible to repeatedly press the button on the right side of the lever to the right of the steering wheel: when the tire pressure option is displayed, you need to hold down the aforementioned button to ensure that the warning light disappears entirely.
Posted on 19 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Megane
(2015-2023 /
Megane IV, Megane 4)
To reset the tire pressure warning light on the Renault Megane, you need to inflate the tires until they reach the optimal pressure value: this value…
Renault Megane
(2015-2023 /
Megane IV, Megane 4)
To reset the tire pressure warning light of the Renault Megane, you need to inflate the tires to the recommended pressure value, which is indicated o…
Renault Megane
(2008-2015 /
Megane 3, Megane III)
In order to reset the tire pressure sensor of the Renault Megane, first you need to inflate the tires, bringing them back to the correct inflation pr…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.086
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
