Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : Rear bumper replacement on Renault Cio

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Rear bumper
Operation: Rear bumper replacement on Renault Cio

Disassembly of the damaged bumper of a Renault Clio, let's see how to do it. With a screwdriver or cordless screwdriver we unscrew the locking pins located in the front part of the bumper. We unscrew the screws placed in the lower part of the bumper, then, we remove the screws placed on the sides of the car's stone guards (we remove the wheels if the space is minimal). Once the bumper is free from any screw or pin, let's take it with your hands and pull it away from the bodywork (disconnect any power cables). We use a jack to lift the car for easier disassembly.


Posted on 29 November 2023 by ScegliAuto



How to remove the rear bumper on the Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this tutorial we can see how to disassemble the rear bumper in the Renault Clio, an extremely simple and quick operation. First, we lift the rear
How to replace the battery of the Renault Clio 4 key
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this new guide dedicated to the world of Renault Cio Mk4 maintenance we will show you the various steps necessary to correctly replace the key bat
Remove the rear bumper of a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) How to remove the rear bumper of a Renault Clio? Let's see together how to proceed, an operation that is not too complex. Using a screwdriver, unscre

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos