Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Air filter

See other generations:
Video tutorial

Is the air filter worn out and needs replacing on a Renault Clio? Remove and replace it. Open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the bonnet, securing it with the prop. Remove the engine soundproofing panel, then disconnect the securing plastics and extract the worn air filter.

Insert a new filter into the designated housing (ensuring it fits snugly around the edges), secure the new filter with the plastics, and close the bonnet after installation.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the 2012 Renault Clio
How to Replace the Air Filter of the 2012 Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Replacing the engine air filter of your 2012 Renault Clio III is quite simple. Follow the procedure below to complete the task without any difficulty…
How to Change the Engine Air Filter on a Renault Clio 4
How to Change the Engine Air Filter on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the engine air filter on your Renault Clio fourth generation by yourself, you only need a few minutes. All you have to do is read the foll…
How to Replace the Air Filter in a Renault Clio 4
How to Replace the Air Filter in a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The video illustrates how to replace the air filter in a fourth-generation Renault Clio. First, switch off the vehicle and remove the key, then open …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos