Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : Engine air filter replacement on Renault Scenic

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Air filter
Operation: Engine air filter replacement on Renault Scenic

Let's see the replacement of the worn air filter on a Renault Scenic. We open the car door, pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood. We unscrew the fastening screws and remove the cover plastics under the panel (front windshield). Once the cover plastics have been removed, open the air kit, uncover the filter box cap and extract the worn air filter. We insert a new filter inside the engine compartment (making it adhere well around the walls). We mount the covers over the filter container and screw in the clamping screws.


Posted on 20 December 2023 by ScegliAuto



Renault Scenic air filter replacement
Renault Scenic (2003-2009 / MK 2, Scenic 2) How do you replace the air filter on a Renault Scenic? Let's see how to remove the car air filter from inside the engine compartment. We open the eng
How to replace the air filter of the Renault Scenic 2
Renault Scenic (2003-2009 / MK 2, Scenic 2) In the following guide dedicated to all of you who own a Renault Scenic Mk2, we will discover the steps you need to take to correctly replace the eng
Renault Scenic air filter replacement
Renault Scenic (2003-2009 / MK 2, Scenic 2) In this video we will see how to replace the engine air filter of the Renault Scenic second series. First we open the bonnet and remove the rubber ga

Other guides that may interest you

    Frequently Asked Questions

    • Scenic 2009-2015 - Where is the Renault Scenic 3 engine air filter located? Read Answer
    • Scenic 2003-2009 - Where is the Renault Scenic II engine air filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos