Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : Replacing the wiper motor on Megane 2

Renault Megane - Video tutorial

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Windscreen wipers
Operation: Replacing the wiper motor on Megane 2

No longer work and wiper blades? How do you disassemble the motor? Let's see the disassembly. We open the front hood and identify the disassembly plastics. We remove the grille placed under the windshield, then, with a socket wrench, we disassemble the arms of the wiper blades. We remove the plastic coating with special locking screws, disconnect the battery terminals before removing the electrical terminals. We unscrew the screws of the starter motor, then we can remove it from inside the dedicated compartment. We replace the piece we disassembled with a new original one.


Posted on 16 February 2024 by ScegliAuto

This video is currently unavailable


Replacement of the wiper motor
Renault Megane (2002-2010 / Megane 2) Remove the door panel by removing the screws and levering the various plastic clips with a screwdriver. The wiper mechanics can now be accessed. Firs
Removing the wiper motor
Renault Megane (1995-2003 / Megane 1) The wiper motor is integrated into the wiper mechanism and is located just under the windshield, masked by the plastic cover; to be able to disassemb
Replacing the starter motor brushes of Renault Megane - Clio
Renault Megane (2002-2010 / Megane 2) In this guide, let's see the main instructions for disassembling and replacing the starter motor brushes of the Renault Megane 1.4, but also of the C

Other guides that may interest you

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos