Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Headlamps from a Renault Laguna 3

Model: Renault Laguna MK 3, Laguna III, MK III, X91, Laguna 3 - Years 2007-2015
Part: Headlight

This guide shows how to remove the front headlamps from a Renault Laguna 3 Sportour. The first step is to secure the vehicle and open the bonnet. At this point, detach the plastic cover of the engine compartment using the four screw clips and two Torx screws; the mask has two fixing pins at the bottom. Next, unscrew the screws securing the bumper located in the wheel arches and under the front of the car. After unscrewing these screws, remove two bolts located under the wheel arches. Now you can detach the bumper fixing pins; once the bumper is removed, pay attention to the electrical connections of the fog lights. Under the headlamp, there are screws securing the plastic mask that need to be removed. After unscrewing the headlamp securing bolts, you can pull out the bulb holder and then disconnect the electrical connectors.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Laguna (2001-2007 / MK 2, Laguna 2, X74) In this tutorial we can see how to remove the front headlights in the Renault Laguna, an extremely simple and quick operation. First of all, make sur…
Renault Laguna (2001-2007 / MK 2, Laguna 2, X74) In this tutorial, you will see how to remove the front headlights on a Renault Laguna, a very simple operation to perform if you need to replace a bu…
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) In this guide, we will discover the instructions on how to remove and replace the front headlights of the Renault Laguna. First, open the vehicle's b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos