Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Front Suspension Wishbone

Model: Renault Megane Megane 1 - Years 1995-2003
Part: Suspension system

Lift the vehicle on suitable axle stands and remove the front wheel; free the wishbone from the stabiliser bar end, the hub from the wishbone end of the suspension (use a fork puller to extract it from its position), and from the shock absorber to complete the removal of the wishbone by unscrewing the bolts that secure it to the engine cradle; at this point, it is possible to remove the wishbone from its position and proceed in reverse for the installation of the new one, complete with both bush and end: take care when tightening the bolts.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (1995-2003 / Megane 1) Lift the vehicle on suitable axle stands and remove the front wheel. Start by removing the ball joint that connects the anti-roll bar to the suspensi…
Renault Megane (1995-2003 / Megane 1) To replace the front hub bearing, you need to remove the hub itself, disconnecting everything attached to it: suspension wishbone, driveshaft, steeri…
Renault Megane (1995-2003 / Megane 1) This system allows you to replace the drive shaft gaiter without disassembling the CV joint: however, you need to extract the drive shaft from the hu…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos