Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Suspension Wishbone

Model: Renault Megane Megane 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Suspension system

See other generations:
Video tutorial

Lift the vehicle on suitable axle stands and remove the front wheel. Start by removing the ball joint that connects the anti-roll bar to the suspension wishbone, then the one from the wishbone to the hub support.

Remove the bolts securing the shock absorber to the hub support and then those of the suspension wishbone to the engine cradle. Use a lever to assist in extracting the bolts and then the suspension wishbone.

Fit the new wishbone and reverse the process to secure it with the respective bolts.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Replacement of Front Suspension Wishbone
Replacement of Front Suspension Wishbone
Renault Megane (1995-2003 / Megane 1) Lift the vehicle on suitable axle stands and remove the front wheel; free the wishbone from the stabiliser bar end, the hub from the wishbone end of …
Front Hub Bearing Replacement
Front Hub Bearing Replacement
Renault Megane (1995-2003 / Megane 1) To replace the front hub bearing, you need to remove the hub itself, disconnecting everything attached to it: suspension wishbone, driveshaft, steeri…
Drive Shaft Gaiter Replacement Instructions
Drive Shaft Gaiter Replacement Instructions
Renault Megane (1995-2003 / Megane 1) This system allows you to replace the drive shaft gaiter without disassembling the CV joint: however, you need to extract the drive shaft from the hu…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos