Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Daytime Running Light Bulb on a Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Headlight bulb

If you need to replace the front daytime running lights on this vehicle, you will find the instructions in the video and the description below. First, obtain a plastic trim tool to remove the headlamp surround. Then, unscrew the fixing screws of the headlamp and pull it out towards you. Next, disconnect the electrical connector located at the back. Take the new headlamp and position it, then re-screw the fixing screws and finally reattach the plastic surround. Follow the same procedure for the other headlamp.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Daytime Running LED Bulb in the Front Headlamp of a Renault Megane
How to Replace the Daytime Running LED Bulb in the Front Headlamp of a Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) In this guide, we will discover the instructions that will allow you to repair or replace the daytime running LED bulb in the front headlamp of a Ren…
How to automatically set the daytime running lights on the Renault Scenic III
How to automatically set the daytime running lights on the Renault Scenic III
Renault Megane (2008-2015 / Megane III, Megane 3) We can see in this video how to activate the daytime running lights setting on a Renault Megane II: we see that on the top of the lever on the right …
How to replace the side indicator bulb of the Renault Megane 1.
How to replace the side indicator bulb of the Renault Megane 1.
Renault Megane (1995-2003 / Megane 1) If one of the side turn signals of your first-generation Renault Megane has stopped working and you are looking for a guide to help you replace the b…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos