Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Renault Megane

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Body

See other generations:
Video tutorial

If you intend to remove the front bumper on this car model, the following description provides all the necessary instructions and information for proper execution. Open the bonnet and proceed to unscrew the fastening screws on the bumper located at the sides near the inner wing.

Then lift the vehicle to remove the screws along the lower edge corresponding to the splash panel. Move to the top of the bumper to remove the fastening clips located above the grille and then remove the upper plastic panel.

Use an Allen key to unscrew the screws found under the panel. After doing this, start detaching the bumper from the sides, then lift it to completely remove it.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Renault Scenic
How to Remove the Front Bumper of the Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) In today's instructions, you will learn how to remove and replace the front bumper of the Renault Scenic in simple steps. First, open the vehicle's b…
How to Remove the Front Bumper of the Renault Scenic
How to Remove the Front Bumper of the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Today, in this brief and simple guide, see the instructions on how to remove and replace the front bumper of the Renault Scenic. First, open the bonn…
How to Remove the Front Bumper on a Renault Scenic?
How to Remove the Front Bumper on a Renault Scenic?
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) To remove the front bumper on a Renault Scenic, loosen all the screws that secure it to its housing. These screws are located at the top of the bumpe…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos