Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Trip Meter in a Renault Twingo?

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Warning light – error code

In this tutorial, you will learn how to reset the trip meter, simply known as "Trip", in a Renault Twingo 2, a very simple and quick operation. Start by inserting the key and turning on the ignition; it is not necessary to start the engine. Then, scroll through the display screens with quick presses of the button at the end of the windscreen wiper control stalk. Once you reach the screen for the "Trip" meter, hold the same button for about 3 seconds, or for as long as it takes for the interval to return correctly to 0.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the speedometer from a Renault Twingo Mk2?
How to remove the speedometer from a Renault Twingo Mk2?
Renault Twingo (2007-2014 / Twingo 2) If you want to replace the speedometer on your Renault Twingo Mk2, follow the steps shown in this video to see how simple it is to do it yourself. Fi…
…
How to reset the service indicator on the Renault Twingo?
How to reset the service indicator on the Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this tutorial we can see how to reset the service in the Renault Twingo, an extremely simple and quick operation, to be carried out only once all …

Other guides you may be interested in

    Frequently Asked Questions

    • Twingo 2014-2024 - What to do if the "STOP" warning light comes on in the Renault Twingo? Read answer
    • Twingo 2014-2024 - What does the "STOP" warning light mean in the Renault Twingo? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos