Do it yourself
Frequently asked questions about cars and motorcycles

How to change the battery on the Renault Megane II 1.5 DCI.

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Battery

Let's see how to change the battery of the Renault Megane II 1.5M DCI; we open the front hood. The battery is located to the right of the engine. We will have to unscrew the battery support plate to remove it. Then we will disconnect the negative terminal of the battery, making sure the cable is well disconnected. We remove the plastic protection from the positive terminal, then remove the terminal. Now we can remove the battery. We clean the terminals from the white oxide with fine sandpaper. On the new battery, we apply copper grease to the terminals to improve the connection. Now we can position it in its housing. We start by putting back the positive terminal, put back its plastic protection. Now we can attach the negative terminal. In the video, they indicate a trick to put the support plate back in place and prevent it from falling into its housing. Operation completed.


Posted on 12 August 2023 by ScegliAuto



When and how to change the timing belt on Renault Megane 2 1.5 DCI
Renault Megane (2002-2010 / Megane 2) In this video we will see when and how to change the timing belt on a Renault Megane 2 1.5 DCI, but also on the Clio, Dacia Sandero, and Nissan Qashq
Replacing the timing belt of the Renault Megane 2 1.5 DCI
Renault Megane (2002-2010 / Megane 2) Today we will see, in this guide, the main steps that will allow us to change the timing belt of the Renault Megane second series, with a 1.5 DCI eng
How to replace the starter motor of the Renault Megane 1.9 dCi.
Renault Megane (1995-2003 / Megane 1) This short and simple guide will show us the instructions on how to dismantle and replace the starter motor of the Renault Megane 1.9 dCi. First, we

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos