Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Airbag Control Unit in the Renault Twingo?

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Airbag

In this tutorial, see how to remove the airbag control unit in the Renault Twingo. This operation is very simple and quick. First, ensure the key is not inserted, then go inside the cabin, grasp the base of the gear knob, and unclip it. Next, unscrew the two indicated Torx screws with a Torx key, remove the entire plastic support, and cut the carpet centrally. At this point, you will have access to the control unit, which can be removed by simply unscrewing the two fixing bolts.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Location and Diagram of the Fuse Box on Renault Twingo
Location and Diagram of the Fuse Box on Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) The fuse box for the cabin is located inside the glove compartment on the Renault Twingo. Here you will find, for example, the fuse that controls the…
Where is the OBD port located in the Renault Twingo?
Where is the OBD port located in the Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this video, you can see where the OBD port is located in the Renault Twingo, useful if you need to read the error codes recorded by the ECU using …
Where are the fuses located in the Renault Twingo?
Where are the fuses located in the Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) The fuses in the Renault Twingo are located inside the designated fuse box found in the vehicle. In this case, the box is positioned at the back of t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos