Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a 2018 Renault Captur

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

When the TPMS light illuminates on your vehicle, it means that the tyre pressure needs adjusting. Once you have adjusted the pressure, proceed to reset the light by: - Turning on the vehicle's ignition; - Pressing the SET button located on the right lever of the steering wheel until you select "TYRE PRESSURE"; - Holding the SET button until the light turns off completely; Once finished, switch off and restart the engine to complete and confirm the reset of the light.

If the light reappears, perform a diagnostic check.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a Renault Captur
How to Reset the TPMS Light on a Renault Captur
Renault Captur (2019-2026 / MK 2) After inflating all four tyres and checking them according to the instructions on the stickers located on the door sills, you can reset the TPMS ligh…
How to Reset the TPMS Light on a Renault Captur
How to Reset the TPMS Light on a Renault Captur
Renault Captur (2019-2026 / MK 2) The TPMS light comes on in a Renault Captur when it is necessary to adjust the tyre pressure. Once you have adjusted the tyre pressures according to …
How to reset the TPMS light on the Renault Captur.
How to reset the TPMS light on the Renault Captur.
Renault Captur (2019-2026 / MK 2) Today we will see how to reset the tire pressure sensors on a Renault Captur vehicle. Before performing the reset of the warning light, it is importa…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos