Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to replace the fan resistor in the Renault Megane.

Renault Megane - Video tutorial

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Checks and maintenance
Operation: How to replace the fan resistor in the Renault Megane.

Replacing the fan resistor (also known as the resistor pack or fan control module) on a Renault Megane requires some basic mechanical skills and can be done by following the following general steps: Make sure the car is turned off and the cooling system is cool. Locate the fan resistor, which is usually located in the engine compartment near the radiator fan. It may be mounted on a bracket or directly on the fan body itself. Disconnect the electrical connector that connects the resistor to the fan. Usually, you will need to press a locking mechanism or push a lever to release the connector. Remove the bolts or screws that secure the resistor in place. You may need to use an appropriate wrench or screwdriver to remove them. Carefully remove the old resistor from its position, being careful not to damage the wires or other surrounding parts. Install the new fan resistor in its place, making sure it is properly aligned and secured with the bolts or screws. Make sure all electrical connections are properly inserted and locked. Reconnect the electrical connector to the new resistor, making sure it is fully inserted and locked in place. Check that everything is securely fastened and that there are no disconnected or loose parts. Start the engine and test the fan operation at different speeds to ensure that the new resistor is functioning correctly.


Posted on 8 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Megane 2008-2015 - What are the issues with the Renault Megane DCI 110CV? Read Answer
    • Megane 2008-2015 - Where is the internal temperature sensor located in the Renault Megane? Read Answer
    • Megane 2008-2015 - Did the Renault Megane 3 show possible issues in the past? Read Answer
    • Megane 2008-2015 - Have there been any known issues in the past with the Renault Megane 3? Read Answer
    • Megane 2008-2015 - What are the causes of air conditioning problems on the Renault Megane? Read Answer
    • Megane 2015-2023 - Why doesn't the Service light on the Renault Megane reset? Read Answer
    • Megane 2008-2015 - Why doesn't the fuel door of the Renault Megane open? Read Answer
    • Megane 2002-2010 - What to do if the fan of the Megane 2 is not working? Read Answer
    • Megane 2015-2023 - How do you reset the Service light on a Renault Megane? Read Answer
    • Megane 2008-2015 - Have any issues been highlighted in the Renault Megane 1.5 dci 115 CV? Read Answer
    • Megane 2008-2015 - What could cause problems with the injection system in the Renault Megane? Read Answer
    • Megane 2008-2015 - Why is the Renault Megane 3 not starting? Read Answer
    • Megane 2015-2023 - What does the wrench-shaped warning light indicate on the Renault Megane? Read Answer
    • Megane 2015-2023 - When does the message "braking system error" appear in the Renault Megane? Read Answer
    • Megane 2008-2015 - What are the problems with Renault Megane 1.5 DCI? Read Answer
    • Megane 2008-2015 - What are the problems with the engine of the Renault Megane 1.5 DCI 110hp? Read Answer
    • Megane 1995-2003 - How do you reset the service light on a Renault Megane 1? Read Answer
    • Megane 2008-2015 - Where is the EGR valve located in the Renault Megane 1.9 dCi? Read Answer
    • Megane 2008-2015 - Why won't the Renault Megane start? Read Answer
    • Megane 2008-2015 - What are the causes of the central locking problem on the Renault Megane? Read Answer

How to set the time on the Peugeot 308

If we need to change the time on this car we can follow the instructions given in this video tutorial and read the instructions below. First of all, access the driver's seat and turn on the ignition. On the right multifunction lever there are the controls with the arrows to scroll the various menu functions and scroll the various functions up to "display adjust", after which press the button behind the lever to change the time, once set the new value press again the key with the arrow indication and modify the minutes in this way the work will be completed.

Watch the video!


by ScegliAuto

More videos