Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Engine Oil and Oil Filter

Model: Renault Scenic - Years 1996-2003
Part: Engine oil

Using an Allen key, gently unscrew the oil sump plug, allowing the oil to drain into a container. Open the oil filler cap on the engine to allow it to drain completely. Using a hose clamp spanner, gently unscrew the oil filter by acting on the body and remove it from its seat. Empty the residual oil from the container and the filter into a container. Clean the filter seat thoroughly with a cloth. Replace the rubber seal of the container. Replace the used cartridge with a new one of the same type. Refit the oil filter, ensuring it is screwed in correctly, and top up with new oil. Do not dispose of used oil in the environment; take it to the appropriate collection centres.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Scenic (2003-2009 / MK 2, Scenic 2) The procedure illustrated in this guide will show us how to perform the regular maintenance check, replacing the engine oil and oil filter, of the Re…
Renault Scenic (2003-2009 / MK 2, Scenic 2) Today, in this short video, we will see how to change the oil and the engine filter on our Renault Scenic. It's not a very complex operation; just be…
Renault Scenic (2003-2009 / MK 2, Scenic 2) Today, you will see how to remove and replace the oil filter on a second-generation Renault Scenic in this video tutorial. First, open the bonnet and…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos