Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wing of the Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Accessory kit

Release the bonnet from the appropriate lever and lift it. Then, raise your vehicle on suitable axle stands to remove the wheel on the side being worked on. This will allow you to work much more comfortably. Remove the bolts indicated in the video that secure the inner part of the wing to the inner part of the front bumper and to the bodywork near the door. Then, simply reposition the new part to install and retrace the steps described for reassembling the various components.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Wing of a Renault Clio
How to Remove the Front Wing of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) This guide outlines the steps to remove and replace the front wing of a Renault Clio, following the instructions below. First, open the bonnet of you…
How to Replace the Front Wing of a Renault Clio
How to Replace the Front Wing of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) First, remove the wheel where the replacement will occur, then lift the vehicle. This will provide easy access to the clips and bolts securing the wi…
Replacing the Diesel Filter on the Renault Clio 3
Replacing the Diesel Filter on the Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The diesel filter for the 1.5 dCi engine of the Renault Clio 3 is a special filter: it is a single plastic block that contains the filter and is not …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos