Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Satellite Navigation System

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Car stereo

Using a small flathead screwdriver, detach and remove the climate control console by disconnecting the plugs connected to it. Similarly, detach and remove the ashtray compartment and the CD player. Drill a hole in the back of the ashtray compartment and pass the satellite navigation power cable through, connecting it to the cigarette lighter power supply. Reconnect and reattach the CD player, the ashtray, and the climate control console. You can now place the satellite navigation system under the ashtray and power it with the prepared cable.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing Double DIN System
Installing Double DIN System
Saab 9 3 (2002-2014 / MK 2) Installing a 2 DIN car radio in the vehicle requires good manual skills and the necessary tools to properly shape the housing for the new radio (give…
Car Stereo Installation
Car Stereo Installation
Saab 9 3 (2002-2014 / MK 2) Installing a car stereo is a straightforward task that you can do independently. Before starting, disconnect the battery cables. Then, remove all the…
Installation of Anti-Roll Bar
Installation of Anti-Roll Bar
Saab 9 3 (2002-2014 / MK 2) The anti-roll bar is a mechanical component that connects two arms or hubs, or in this case, the independent wheel suspensions on the same axle, to c…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos