Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Anti-Roll Bar

Model: Saab 9 3 MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Accessory kit

See other generations:
Video tutorial

The anti-roll bar is a mechanical component that connects two arms or hubs, or in this case, the independent wheel suspensions on the same axle, to counteract the vehicle's roll during driving. The installation is very simple.

Obtain the appropriate anti-roll bar for the vehicle. For this operation, you only need an 18 mm socket spanner.

Unscrew the three bolts that secure the shock absorber to the chassis and position the bar over the dome to align the shock absorber mounting holes. Also unscrew the corresponding bolts of the other shock absorber and proceed as above.

Refit the shock absorber with the anti-roll bar.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Steering Tie Rod End Replacement
Steering Tie Rod End Replacement
Saab 9 3 (2002-2014 / MK 2) Lift the vehicle with a jack, secure it on appropriate axle stands, and remove the front wheel (before lifting the vehicle, loosen the wheel fastenin…
Car Stereo Installation
Car Stereo Installation
Saab 9 3 (2002-2014 / MK 2) Installing a car stereo is a straightforward task that you can do independently. Before starting, disconnect the battery cables. Then, remove all the…
Instructions for Dismantling Front Shock Absorbers
Instructions for Dismantling Front Shock Absorbers
Saab 9 3 (2002-2014 / MK 2) In the case of the vehicle in question, the front shock absorber also includes the hub support: to dismantle it, you must lift the vehicle, remove th…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos