Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the door panel on the saab 9 3

Model: Saab 9 5 MK 1, Ys3e - Years 1997-2010
Part: Door trim panel

We replace the panel covering the car door if it is damaged. Let's see the disassembly. We disconnect the terminals of the supply battery. With a screwdriver we unscrew the screws placed in the space of the upper lever of the door opening (we remove the cap). Remove the plastic covering the handle, unscrew the screws placed in the handle and detach the clamping clips of the same. Remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We mount the new panel above the door, screw in the fastening screws.

Posted on 19 June 2020 by ScegliAuto

Video tutorial

Related tutorials

Saab 9-5 brake pads replacement
Saab 9-5 brake pads replacement
Saab 9 5 (1997-2010 / MK 1, Ys3e) In today's video we will see how to remove and replace the brake pads of a Saab 9-5. First we go to disassemble the wheel by unscrewing the bolts wit…
Removing the Front Door Panel
Removing the Front Door Panel
Saab 9 5 (1997-2010 / MK 1, Ys3e) This video shows how to remove the front door panel. First, remove the screw located just behind the opening lever, followed by the other screws situ…
How do you remove the dashboard of the Saab 9-5?
How do you remove the dashboard of the Saab 9-5?
Saab 9 5 (1997-2010 / MK 1, Ys3e) In order to disassemble the dashboard of the Saab 9-5, you need to loosen the screws that secure the radio in the center of the dashboard: once the s…

Other guides you may be interested in

How to Replace the Fuel Pump on an Opel Corsa C

Usually, upon the first ignition of the dashboard, a sound similar to a spray can be heard from the rear of the cabin: this is the fuel pump pressurising the system and preparing to supply fuel to the engine for ignition; if this sound is not heard, start by checking the integrity of the relevant power fuse, and if it is intact, verify that voltage reaches the power connector; if current is present, you can also try powering the pump directly to confirm it is faulty; replacing it is very simple, just disconnect the connector and hoses, then unclip the retaining ring and remove it to replace it with a new one.

Watch the video!


by ScegliAuto

More videos