Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Window Regulator Motor

Model: Saab 9 3 MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Power window motor

See other generations:
Video tutorial

To replace the window regulator motor, first remove the door panel: before proceeding with the removal, it is advisable to disconnect one battery terminal. Unclip the handle cover and unscrew the screws underneath; using a suitable lever, unclip the pressure clips along the edges of the panel and remove it from its housing by disconnecting the opening handle cable, the connectors for the window switches, and the speaker.

Then peel back the soundproofing material along the edges, taking care not to tear it; unscrew the pins of the glass securing clips and slide the glass out of its housing. Next, remove the window lift mechanism from inside the door along with the motor: once the mechanism is on the bench, you can disassemble and replace just the motor (usually available in the aftermarket).

Proceed in reverse for reassembly.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Saab 9 3 (1998-2003 / MK 1) Cleaning the cabin air filter is absolutely essential to avoid the unpleasant smell often noticed when first turning on the air conditioning. Therefo…
Replace Mirror on Saab 9-3
Replace Mirror on Saab 9-3
Saab 9 3 (2002-2014 / MK 2) Replace the mirror on a Saab 9-3. Use a plastic lever to pry between the perimeter of the mirror frame and the mirror glass. Pry until the mirror det…
Replace Antenna on Saab 9-3
Replace Antenna on Saab 9-3
Saab 9 3 (2002-2014 / MK 2) Replace the non-functioning antenna on a Saab 9-3. Use a screwdriver to pry between the securing clips and the headlining (without damaging the headl…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos