Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Valve Cover Gasket

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Cylinder head

For this job, you will need an 8mm and a 10mm socket wrench, a flat-head screwdriver, and a replacement gasket. Remove the protective caps from the bolts on the cylinder head and unscrew the nuts. Open the oil cap and remove the plastic protections. Lift the retainers of the spark plug connectors and remove the wiring block. Also, remove all spark plug connectors and their anchoring support. Unscrew all bolts of the valve cover and gently remove it. Carefully remove the gasket from the cover and install the new one, ensuring it adheres perfectly. Reassemble the cover, ensuring it fits well against the cylinder head. Screw in all bolts and reconnect the spark plug connectors.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter on Saab 9 3
How to replace the cabin air filter on Saab 9 3
Saab 9 3 (2002-2014 / MK 2) How to replace the cabin air filter on Saab 9 3? Let's see how to proceed: open the car door, pull up the engine compartment opening lever located at…
How to Change Engine Oil and Oil Filter
How to Change Engine Oil and Oil Filter
Saab 9 3 (2002-2014 / MK 2) This video shows how to change the engine oil and the oil filter on a Saab 9-3. After opening the bonnet, remove the plastic engine cover secured wit…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Saab 9 3 (1998-2003 / MK 1) The cabin air filter is located in the engine bay, just below the windscreen: to replace it, you need to remove the plastic cover grille situated dir…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos