Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing AUX IN Adapter

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Accessory kit

To install an AUX input, you need to remove the original radio to connect the interface control unit of the input: you will need the appropriate extraction keys to insert into the relevant holes at the top of the radio. Once the radio is removed, connect the adaptation wiring and the related control unit, passing it through the climate control compartment to apply the AUX output right at one of the blanking plugs located under the climate control controls. Finally, perform a functionality check.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Aux Output Installation Instructions
Aux Output Installation Instructions
Saab 9 3 (2002-2014 / MK 2) To install the Aux output cable, detach the monitor located under the car radio and the climate control panel positioned beneath the radio by disconn…
Car Stereo Installation
Car Stereo Installation
Saab 9 3 (2002-2014 / MK 2) Installing a car stereo is a straightforward task that you can do independently. Before starting, disconnect the battery cables. Then, remove all the…
Installing Double DIN System
Installing Double DIN System
Saab 9 3 (2002-2014 / MK 2) Installing a 2 DIN car radio in the vehicle requires good manual skills and the necessary tools to properly shape the housing for the new radio (give…

Other guides you may be interested in

How to Replace the Right Fog Light Bulb on a Ford Fiesta

Replacing the fog light bulb on the passenger side, which uses an H11 fitting (the bulb holder also integrates the connector for the power supply), can be done either by accessing from underneath the vehicle by removing some covers, or more simply by dismantling the headlight. Once the headlight is removed, it is easy to reach the fog light housing and release the bulb by rotating the entire bulb holder. Disconnect the connector, connect the new bulb, and insert it into the bulb holder, rotating it until it locks in place.

Watch the video!


by ScegliAuto

More videos