Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Front Bonnet of a Seat Toledo?

Model: Seat Toledo MK 4, KG - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

To open the bonnet of a Seat Toledo, enter the vehicle and locate the release lever under the dashboard, usually near the left side next to the driver's compartment. Pull this lever, and you will hear a click indicating that the bonnet has partially unlocked.

Now, go to the front of the car and find the safety catch located at the centre of the bonnet edge. Lift the bonnet slightly and push or pull the catch to the left or right, depending on the model, to fully unlock it. You can now lift the bonnet and secure it in position with the support rod, typically stored inside the engine compartment.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

How to change the engine air filter of the Seat Toledo
How to change the engine air filter of the Seat Toledo
Seat Toledo (2012-2019 / MK 4, KG) In the following guide you will find the description of all the steps you need to apply to safely replace the engine air filter of your third series …
How to Remove the Front Bumper from the Seat Toledo
How to Remove the Front Bumper from the Seat Toledo
Seat Toledo (1998-2004 / 1M, MK 2) Today's instructions will show you how to remove and replace the front bumper on the Seat Toledo. First, open the vehicle's bonnet and start unscrewi…
How to Replace the Remote Control Battery on a Seat Toledo
How to Replace the Remote Control Battery on a Seat Toledo
Seat Toledo (1998-2004 / 1M, MK 2) In this video tutorial, see how to replace the remote control battery on a Seat Toledo by following these simple steps: first, purchase a CR2032 batt…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos