|
Do it yourself
| |||
| ||||
|
Turbo lubrication is absolutely essential due to the high RPM and constant contact with exhaust gases characterised by high temperature and acidity; this pipe, with a specific geometry to avoid interference with other engine components, allows a constant supply of oil from the engine block to the turbo and indeed has appropriate fittings at both ends for connection. When installing this component, it is very important to also replace the seals, made of copper washers, which ensure a tight seal when compressed during tightening.
Updated on 12 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Seat Leon
(1999-2005 /
1M)
Ensuring the lubrication of the turbo is absolutely essential due to the high RPM and constant exposure to the high temperature of exhaust gases; a s…
Seat Leon
(1999-2005 /
1M)
After machining the cylinder head, use a straight edge and a feeler gauge to check the flatness of the surface; then proceed with the replacement of …
Seat Leon
(1999-2005 /
1M)
This video shows how to install the components that secure the turbo on a Seat Leon. After obtaining the kit, open it carefully and extract the vario…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.048
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
