Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Altea
    4. : Where is the Seat Altea fuse box located

Seat Altea - Video tutorial

Model: Seat Altea MK 1 - Years 2004-2015
Part: Fuse box
Operation: Where is the Seat Altea fuse box located

The fuse box allows you to easily identify any possible malfunction of a specific electrical component of the car. In the Seat Altea the position of the box is rather easy to reach, but at the same time it is well hidden inside the dashboard. To reach it easily and without risk, it is advisable to stop the engine and disconnect the battery. Furthermore, it is also preferable to wear rubber gloves if working on the fuses themselves. Sit on the driver's side and locate the plastic cover to the left of the steering wheel. To remove it, it is necessary to pry it outwards. At this point the fuse box is in front of you.


Posted on 31 July 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Altea 2004-2015 - Where is the Seat Altea fuel pump fuse located? Read Answer
    • Altea 2004-2015 - Where are the fuse boxes of the Seat Altea Freetrack located? Read Answer
    • Altea 2004-2015 - Where is the central locking fuse of the Seat Altea located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos