Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Seat Ibiza

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Timing belt

See other generations:
Video tutorial

The timing belt on the Seat Ibiza must be replaced after a certain mileage or after a specific time period. The vehicle's maintenance manual provides detailed information on this.

The procedure shown in this video is as follows: Lift the vehicle on the right side, remove the wheel and the wheel arch liner to facilitate the work. Open the bonnet and remove the protective cover of the timing belt, the bearing, and the tensioner.

Once the new part is installed, reverse the procedure to reassemble everything and complete the job.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Seat Ibiza?
How to Replace the Timing Belt on a Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) To replace the timing belt on a Seat Ibiza, open the bonnet to access the components inside the engine bay. On the left side of the engine block, you…
When to replace the timing belt on a Seat Ibiza 1.2 TDI?
When to replace the timing belt on a Seat Ibiza 1.2 TDI?
Seat Ibiza (2002-2009 / 6L) Among the various periodic replacements to carry out on your vehicle, such as the Seat Ibiza 1.2 TDI, is the timing belt. The manufacturer specifies …
How and When to Replace the Timing Belt on a Seat Ibiza 1.0 TSI
How and When to Replace the Timing Belt on a Seat Ibiza 1.0 TSI
Seat Ibiza (2008-2017 / 6J, 6P) Below are the main instructions for removing and replacing the timing belt on a Seat Ibiza 1.0 TSI, as well as on a Volkswagen Polo. This type of eng…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos