Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve from a Seat Leon 1.9 TDI

Model: Seat Leon 1P - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: EGR valve

See other generations:
Video tutorial

Today, we will go through the instructions to remove and replace the EGR valve on a Seat Leon 1.9 TDI. First, raise the vehicle and begin by removing the plastic cover located under the engine; then locate the EGR valve, disconnect it from the exhaust manifold, and unscrew all the fixing screws as shown in the video.

At this point, clean it with appropriate degreasers, or directly replace it if it is too dirty or damaged; secure the EGR valve and ensure it is correctly connected.


Updated on 30 August 2026 by ScegliAuto


Related tutorials

How to Clean the EGR Valve on a Leon
How to Clean the EGR Valve on a Leon
Seat Leon (2005-2013 / 1P) How to remove the EGR valve on a Seat Leon? Start by removing the engine cover, unscrew the locking pins of the ventilation pipe, and remove the engi…
Can the EGR Valve Be Cleaned Without Removing It?
Can the EGR Valve Be Cleaned Without Removing It?
Seat Leon (1999-2005 / 1M) First, let's explain what the EGR valve is, which is a device that recovers some of the exhaust gases from diesel engines, thus aiming to reduce envi…
How and When to Replace the Timing Belt on the Seat Leon 1.6 TDI?
How and When to Replace the Timing Belt on the Seat Leon 1.6 TDI?
Seat Leon (2012-2019 / 5F, MK 3) This guide provides the necessary instructions on how to remove and replace the timing belt on the Seat Leon 1.6 TDI; the manufacturer states in the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos