Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Rapid
    4. : Instrument cluster

Skoda Rapid - Instrument cluster

Skoda Rapid (2012-2019 / MK 1)
How to reset the maintenance light on the Skoda Rapid
If when you turn on the instrument panel of your Skoda Rapid you notice that the maintenance light does not turn off even though you have recently had the car …read all…
Posted on 12 March 2024 by ScegliAuto
Skoda Rapid (2012-2019 / MK 1)
To reset the service indicator of the Skoda Rapid.
To manually reset the service light on your Skoda Rapid, it only takes a few seconds. Let's find out together the steps you need to follow to do it. First of …read all…
Posted on 5 October 2023 by ScegliAuto
Skoda Rapid (2012-2019 / MK 1)
How to reset the service on Skoda Rapid.
After replacing the engine oil and filter on this car model, we then need to reset the service light on the dashboard. To do this, we have collected all the …read all…
Posted on 10 June 2023 by ScegliAuto
Skoda Rapid (2012-2019 / MK 1)
How to reset the oil light on Skoda Rapid
Thanks to the method that we are going to explain to you below, you will be able to manually reset the engine oil light of your Skoda Rapid in a completely …read all…
Posted on 4 April 2023 by ScegliAuto
Skoda Rapid (2012-2019 / MK 1)
How to reset the TPMS on the Skoda Rapid
If we have checked that the low tire pressure warning light has turned on on the instrument panel of our car, we must first of all proceed to measure and, if …read all…
Posted on 2 July 2022 by ScegliAuto
Airbags (2) Car stereo (1) Key (1) Timing belt (1) -board computer (3) Checks and maintenance (11) Cabin air filter (1) Interior lights ceiling light bulb (1) Door panel (1) Fuel pump (1) Instrument cluster (5) Fuse box (4) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos