Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Skoda Fabia

Model: Skoda Fabia 5J, Mark2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Timing belt

See other generations:
Video tutorial

Replacing the timing belt on a car is a rather complex job. Below, we outline the main phases, also using the video for guidance. First, open the bonnet, remove the right front wheel, and lift the vehicle.

Next, remove the upper cover of the timing belt by releasing the two clips, and unscrew the bolts of the engine mount. This will give you access to the upper part of the timing belt and the auxiliary belt.

Set and secure the top dead centre by rotating the crankshaft and marking the reference with a marker to avoid losing the timing. Then, remove the auxiliary belt by loosening the tensioner.

Next, remove the crankshaft pulley and the lower cover of the timing belt. At this point, you can remove the belt by loosening the tensioner.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

Guide to replacing the timing belt of the Skoda Fabia 1.4
Guide to replacing the timing belt of the Skoda Fabia 1.4
Skoda Fabia (2007-2014 / 5J, Mark2) Today's main steps will show us how to disassemble and replace the timing belt of the Skoda Fabia 1.4, also replacing the water pump. First, we open …
Replacing the Timing Belt on Skoda Fabia 1.0 TSI
Replacing the Timing Belt on Skoda Fabia 1.0 TSI
Skoda Fabia (2014-2021 / Mark3, NJ) The following instructions will show you how to replace the timing belt on the Skoda Fabia 1.0 TSI. First, open the bonnet of the vehicle and begin r…
Guide to Removing the Timing Belt on a Skoda Fabia
Guide to Removing the Timing Belt on a Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) Today's instructions will show you the steps needed to remove and replace the timing belt on the Skoda Fabia. First, open the vehicle's bonnet and re…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos