Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you open the hood of the Smart ForTwo?

Model: Smart Smart 451 - Years 2007-2015
Part: Checks and maintenance

In order to open the hood of the Smart ForTwo, you need to pull the two tabs located on the sides of the front grille, just above the bumper: once these two tabs have been pulled, it will be possible to unlock the front hood panel of the car. This way, not only will it be possible to unlock it, but also to completely remove it from its seat to access the components located in the compartment below; to close it, simply reposition the panel and lock it in place with the appropriate clips at the front.

Posted on 1 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet of a Smart Fortwo
How to Open the Bonnet of a Smart Fortwo
Smart (2007-2015 / 451) If you need to perform maintenance on your Smart Fortwo, you must remove the front bonnet (to top up the reservoirs). Here’s how to do it. Release th…
How to Open the Bonnet of a Smart Fortwo
How to Open the Bonnet of a Smart Fortwo
Smart (2014-2022 / 453) In this brief and simple guide, learn how to open the bonnet of a Smart Fortwo by following the instructions below. First, move to the front of your …
How to Open the Bonnet of the Smart ForTwo?
How to Open the Bonnet of the Smart ForTwo?
Smart (2014-2022 / 453) If you need to open the bonnet of the Smart ForTwo, you may feel confused the first time, as there is no lever or button for opening inside the cabin…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 1998-2007 - How do you unlock the Smart Fortwo immobilizer? Read answer
    • Smart 1998-2007 - Where is the horn of the Smart 450 located? Read answer
    • Smart 1998-2007 - Where is the jack on a Smart ForTwo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos