Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the oil filter on Smart Fortwo

Model: Smart Smart 450 - Years 1998-2007
Part: Oil filter

How to replace the engine oil filter on a Smart Fortwo? Let's see the replacement in this video. We open the tailgate of the car and pull up the opening lever of the engine compartment. We lift the car on a jack and unscrew the oil pan pin; let the liquid flow into a container (we can suck the oil if we have the right tool). With a socket wrench we unscrew the large locking pin of the container cap where the oil filter is located. We remove the worn oil filter and place a new one. Finally we top up the new liquid and close the front hood.

Posted on 6 April 2020 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the engine oil and oil filter of the Smart Fortwo
Replacement of the engine oil and oil filter of the Smart Fortwo
Smart (1998-2007 / 450) In this guide we will see step by step instructions on how to perform the ordinary maintenance service, replacing the engine oil and oil filter, of t…
When and how to change the engine oil of the Smart Fortwo
When and how to change the engine oil of the Smart Fortwo
Smart (2014-2022 / 453) In this video we see the instructions on how and when to replace the engine oil of the Smart Fortwo 453, carrying out the routine maintenance service…
Smart Fortwo 450 engine oil and oil filter replacement
Smart Fortwo 450 engine oil and oil filter replacement
Smart (1998-2007 / 450) Let's find out in this video how to replace the engine oil and oil filter of the Smart Fortwo 450, in simple steps. First, let's move to the back of …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos