Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb on the Smart Fortwo

Model: Smart Smart 453 - Years 2014-2022
Part: Headlight bulb

In today's video tutorial we will see how to remove and replace the Smart Fortwo headlight bulb, following the instructions below. First we are going to remove the front panel, by pulling the two levers located on the grille of the front bumper; then we go to disconnect the electrical connector, then removing the plastic cap, as shown in the video. At this point we release the metal clip to remove and replace the lamp with the new one, having the same attachment; insert it inside the front light and reassemble everything!

Posted on 30 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to remove the headlight bulb of a Smart ForTwo?
How to remove the headlight bulb of a Smart ForTwo?
Smart (2004-2006 / 454, Fourfour1) Let's start by removing the front top cover of our Smart ForTwo, using the ignition key, and then removing the plastic underneath. After that, we wil…
Smart Fortwo headlight bulb replacement
Smart Fortwo headlight bulb replacement
Smart (2007-2015 / 451) Let's see in this video how to change the light bulb of the small Smart Fortwo subcompact. The procedure is very simple and takes only a few minutes:…
Smart Fortwo 453 headlight bulb replacement
Smart Fortwo 453 headlight bulb replacement
Smart (2014-2022 / 453) In this short and simple guide we will see the main instructions for removing and replacing the headlight bulb of the Smart Fortwo 453. First we open…

Other guides you may be interested in

How to Remove the Door Panel on a Mini

Perform the disassembly of the door panel (front right) on a Mini: disconnect the battery terminals located in the engine bay (if you need to disconnect terminals). Use a lever to remove the plastics in the area of the upper door opening lever and the screws present in the handle (if any). Remove the trim near the window, unscrew the remaining screws on the door panel and detach the securing clips. Finally, pull the panel away with your hands and detach it from the door (disconnect the power wiring and the opening cable).

Watch the video!


by ScegliAuto

More videos