Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Smart 451 fuse box located?

Model: Smart Smart 451 - Years 2007-2015
Part: Fuse box

The fuse box is located under the dashboard near the steering wheel, while the engine fuse box is located near the battery under the passenger side floor. The engine fuse diagram is as follows: F36 Engine 132.9: Secondary air injection pump; F58 Engine 780.009; EDCM electric motor control unit; F58 Engine 132.9: Starting alternator; F91 SAM control unit; ONE Left Turn Signal / Brake Light Relay High voltage battery heater backup relay (ECE vehicles only); B Right turn signal / stop light relay Radiator fan motor relay (ECE vehicles only) Fuel pump relay; C Mirror heater relay Rear fog relay; K57 High voltage battery heater backup relay; K59 Radiator fan motor relay; K61 Fan motor relay 1; K62 Fan motor relay 2.

Posted on 15 November 2022 by ScegliAuto

Video tutorial

Related tutorials

Fuse diagram for Smart 451.
Fuse diagram for Smart 451.
Smart (2007-2015 / 451) On this model of car from the German manufacturer, all fuses are collected inside a box located in the cabin on the left side of the steering wheel u…
Where are the fuses of the Smart 451 located?
Where are the fuses of the Smart 451 located?
Smart (2007-2015 / 451) The fuses of the Smart 451 are located inside the special fuse box. This is located inside the passenger compartment, in the part that is immediately…
Where is the fuse box on the Smart Fortwo
Where is the fuse box on the Smart Fortwo
Smart (2007-2015 / 451) Contrary to what one might think, the fuse box is often found in places that are very easy to reach, albeit hidden for safety reasons. Before finding…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Remove the Fuel Pump from a Hyundai IX35

How to remove the fuel pump from a Hyundai IX35. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; that is what you need to dismantle. Undo the screws of the metal cap and remove it. Wrap the entire perimeter of the metal sheet with absorbent paper or cloth, then, with a screwdriver, undo the large bolt around the pump (if present for the model). Disconnect the power connectors and the liquid circulation pipes. Finally, extract the floating fuel pump. To perform the assembly, work in reverse order.

Watch the video!


by ScegliAuto

More videos