Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump from a Subaru Impreza

Model: Subaru Impreza MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Fuel pump

See other generations:
Video tutorial

In this video, learn how to remove the fuel pump from a Subaru. First, disconnect the battery cables.

Next, remove the rear seat base of the Subaru. You will find various wiring and a metal piece with screws; this is what you need to dismantle.

Unscrew the securing screws of the metal cap and remove it. Wrap the entire perimeter of the metal sheet with paper or an absorbent cloth. Then, using a socket spanner, unscrew the securing pins located at the sides.

Finally, disconnect the power terminals and the fluid circulation tubes. Now, extract the fuel pump.

To reassemble, follow the steps in reverse.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

Fuse Diagram for Subaru Impreza
Fuse Diagram for Subaru Impreza
Subaru Impreza (2011-2016 / MK 4) On the Subaru Impreza, the first fuse box is located inside the cabin, specifically low and to the left of the steering wheel. Here you can find, amo…
Where is the fuse box of the Subaru Impreza located?
Where is the fuse box of the Subaru Impreza located?
Subaru Impreza (2016-2023 / MK 5) In this new guide, we will help you easily locate the fuse box inside the cabin of your Subaru Impreza. First of all, enter the car and reach the dri…
How to replace the diesel filter in a Subaru Impreza.
How to replace the diesel filter in a Subaru Impreza.
Subaru Impreza (2001-2007 / MK 2) In this video tutorial, you can see how to replace the diesel filter in a Subaru Impreza: the first step is to lift the bonnet, secure it with the pr…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos