Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the diesel filter in a Subaru Impreza.

Model: Subaru Impreza MK 2 - Years 2001-2007
Part: Diesel fuel filter

In this video tutorial, you can see how to replace the diesel filter in a Subaru Impreza: the first step is to lift the bonnet, secure it with the prop rod, and disconnect the negative battery cable and the two connector cables on the right. Using a 12 mm socket, undo the two bolts that connect the pump to the bracket. Remember to disconnect the two connectors from the bracket before removing the pump assembly. Protect the engine with a cloth; to unscrew the diesel filter, you can use a special oil filter wrench. Once the filter is empty, it can be unscrewed from the pump; next, remove the plastic cover from the new filter and lubricate the new O-rings with clean engine oil. The next step is to reassemble everything, so screw the new filter onto the lift pump (tighten by hand, not with the wrench). Final step: operate the lift pump to fill the new filter, (starting the engine with an empty filter could damage the high-pressure pump of the injectors).

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Subaru Impreza (2016-2023 / MK 5) Replacing the air filter on your 2017 Subaru Impreza is a task that anyone can carry out independently. With the following mini guide, you will be ab…
Subaru Impreza (2011-2016 / MK 4) How do you remove the engine air filter on a Subaru Impreza? Let's see how to do it after opening the engine bay. Once the front bonnet is lifted, lo…
Subaru Impreza (2016-2023 / MK 5) In this new guide, we will help you easily locate the fuse box inside the cabin of your Subaru Impreza. First of all, enter the car and reach the dri…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos