Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuel pump relay located in the Subaru Outback?

Model: Subaru Outback MK 2, BH, BE - Years 1999-2003
Part: Fuel pump

If the fuel pump of our Subaru Outback has suddenly stopped working, we can first check the status of the respective relay whose position is indicated in this video. As shown, the relay in question is located inside the cabin, specifically in the lower left area of the dashboard on the driver's side. It is easily recognizable by the green connector to which it is connected. If it is faulty, make sure to use a replacement with equivalent specifications and always operate with the vehicle turned off, so as not to cause any damage to the pump.

Posted on 8 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the fuel filter of the Subaru Outback?
How do you replace the fuel filter of the Subaru Outback?
Subaru Outback (2003-2009 / BL, BP, MK 3) In order to replace the fuel filter of the Subaru Outback, you need to completely remove the rear seat cushion so that you can access the underlying …
How to open the fuel door of a Subaru Outback
How to open the fuel door of a Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) In this tutorial today, we will see how to open the fuel door of a Subaru Outback, a model produced by the well-known Japanese company from 2014 to 2…
How to Disconnect the Fuel Supply Line on a Subaru Outback
How to Disconnect the Fuel Supply Line on a Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) It is very simple to disconnect the fuel supply line on a Subaru Outback. Just open the front bonnet of the vehicle and locate the fuel supply line. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos