Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on the Subaru Forester Mk4

Model: Subaru Forester MK 4, SJ - Years 2012-2019
Part: Fuel pump

This guide shows how to replace the fuel filter on the Subaru Forester Mk4. The first step is to disconnect the fuel pump control fuse from the fuse box located on the right side of the engine bay; perform a few engine starts to relieve the fuel pressure in the system. Remove the rear bench seat and the fuel pump cover panel. Disconnect the electrical connector from the pump and clean the work area. Open the two green clips securing the fuel lines and use a container to catch any remaining fuel in the system. Using an 8 mm spanner, remove the securing bolts and extract the assembly. Remove the electrical connectors and the gasket from the pump and disconnect the old filter. Once the old filter body is removed, replace it with the new element and reassemble everything in position. Refit the control fuse, start the vehicle, and check for any leaks. Close the pump housing and reassemble the rear bench seat.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Brake Pads on the Subaru Forester MK4
Replacing the Front Brake Pads on the Subaru Forester MK4
Subaru Forester (2012-2019 / MK 4, SJ) Below are the instructions necessary for removing and replacing the front brake pads on the fourth generation Subaru Forester. Start by lifting the v…
How to Install Logo Projector Puddle Lights on a Subaru Forester
How to Install Logo Projector Puddle Lights on a Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) In this video, you will see a small Class E detail modification on the Subaru Forester, which generally applies to all Subaru models, ensuring that y…
Replacing the front headlight bulb on the Subaru Forester MK4
Replacing the front headlight bulb on the Subaru Forester MK4
Subaru Forester (2012-2019 / MK 4, SJ) Today, we will go through the steps to disassemble and replace the front headlight bulb on the fourth generation Subaru Forester, specifically the 20…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos