Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the key remote for the Subaru Forester

Model: Subaru Forester MK 5, SK - Years 2018-2025
Part: Key

Following these brief steps, we will see how to disassemble and replace the battery of the key fob for the Subaru Forester. First, take your key fob and start by removing the physical key from inside it; then pry on the sides to remove the back cover and access the key battery, as shown in the video. At this point, remove and replace the battery with a new one, of the correct type and with the same code; insert it in the correct direction and reassemble the key fob, finally inserting the key.

Posted on 20 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery in a Subaru Forester?
How to Replace the Remote Battery in a Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) Replacing the remote battery in a Subaru Forester is very simple. For this operation, you need a replacement CR2032 3V battery and a small flat-head …
How to replace the battery in the key fob of the Subaru Forester.
How to replace the battery in the key fob of the Subaru Forester.
Subaru Forester (2012-2019 / MK 4, SJ) Let's see the instructions on how to replace the battery of the Subaru Forester key remote. First, take your remote in hand and start by removing the…
How to replace the battery of the Subaru Forester remote control.
How to replace the battery of the Subaru Forester remote control.
Subaru Forester (2008-2011 / SH, MK 3) Today we will explain how to replace the battery of the Subaru Forester key. To replace the battery, we need to unscrew the small screw on the back o…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos