Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front and rear brake pads of the Subaru Ascent

Model: Subaru Ascent MK 1 - Years 2018-2026
Part: Brake pads

Let's see in this guide the steps that will allow us to remove and replace the front and rear brake pads of the Subaru Ascent. First of all we lift the car and remove the wheel; then we go to unscrew the fixing screws of the brake caliper, in order to remove it from the disc, as shown in the video. At this point, remove the old pads and replace them with the new ones, first cleaning the caliper from dirt; we lever the sides of the piston to make it retract, thus installing the new brake pads, following the video tutorial to the end!

Posted on 30 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the cabin filter on the Subaru Ascent?
How do you replace the cabin filter on the Subaru Ascent?
Subaru Ascent (2018-2026 / MK 1) In order to replace the cabin filter of the Subaru Ascent, you need to open the glove box located on the front passenger side, so that the internal f…
Subaru Ascent front door panel removal
Subaru Ascent front door panel removal
Subaru Ascent (2018-2026 / MK 1) We see in this guide the instructions on how to disassemble and replace the front door panel of the Subaru Ascent, in simple steps. First of all, we …
How to replace the rear light bulbs of the Subaru Ascent
How to replace the rear light bulbs of the Subaru Ascent
Subaru Ascent (2018-2026 / MK 1) Let's find out in this short guide how to replace the rear light bulbs of the Subaru Ascent, in simple and quick steps. First we open the tailgate of…

Other guides you may be interested in

How to Remove the Center Console on a Mercedes C-Class

Let's see how to remove the center console on a Mercedes C-Class. Use a plastic trim tool to pry off the cover located at the bottom of the center console. Remove the leather shift boot along with its plastic frame. After removing the cover, unscrew the fastening screws located at the top of the center console with a screwdriver. Once this is done, pull the console away and disconnect the power cables for the knob. Finally, insert the new piece into the center console area and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos