Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery in a Subaru Forester?

Model: Subaru Forester MK 4, SJ - Years 2012-2019
Part: Key

Replacing the remote battery in a Subaru Forester is very simple. For this operation, you need a replacement CR2032 3V battery and a small flat-head screwdriver. First, remove the emergency key by pressing the designated button. Then, insert the screwdriver tip into the indicated slot and, using leverage, open the remote. Once the central module is removed, proceed to replace the battery, ensuring the positive terminal is facing upwards.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Subaru Forester?
How to Replace the Remote Battery of the Subaru Forester?
Subaru Forester (2018-2025 / MK 5, SK) To replace the remote battery of the Subaru Forester, move the switch located at the bottom of the device: this will allow you to slide the key out f…
How to Replace the Remote Battery of a Subaru Forester
How to Replace the Remote Battery of a Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) Replacing the remote battery of a Subaru Forester produced from 2014 to 2021 is a task you can perform independently with just a few steps. First, in…
How to Replace the Key Fob Battery for the Subaru Forester
How to Replace the Key Fob Battery for the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) This guide will illustrate the steps needed to disassemble and replace the battery of the key fob for the Subaru Forester. First, take your key fob a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos