Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Left Front Door Panel of the Subaru Crosstrek Mk2

Model: Subaru Crosstrek MK 2 - Years: 2018, 2019, 2020, 2021, 2022, 2023
Part: Door trim panel

See other generations:
Video tutorial

This guide shows how to disassemble the inner panel of the left front door of the Subaru Crosstrek Mk2. The first step is to remove the cover of the lock handle compartment using a small screwdriver. Remove the two screws, one in the lock handle compartment and one in the door handle compartment, using a Torx screwdriver.

At this point, from the bottom edge of the panel, use a trim tool to disconnect the retaining clips. Now you can remove the panel.

Be careful of the electrical connectors before removing the piece.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Subaru Crosstrek
How to Replace the Battery on a Subaru Crosstrek
Subaru Crosstrek (2018-2023 / MK 2) To replace the battery on a Subaru Crosstrek, open the hood to access the battery located in the engine compartment near the left headlight. Loosen t…
How to Locate Fuses and Understand Their Schematics in a Subaru Crosstrek
How to Locate Fuses and Understand Their Schematics in a Subaru Crosstrek
Subaru Crosstrek (2012-2017 / GP, MK 1) You can locate the first fuse panel of a Subaru Crosstrek inside the vehicle's cabin, positioned at the lower left of the steering wheel, on the driv…
How to Replace the Battery in a Subaru Crosstrek Remote?
How to Replace the Battery in a Subaru Crosstrek Remote?
Subaru Crosstrek (2018-2023 / MK 2) In this tutorial, you will see how to replace the battery in a Subaru Crosstrek remote. For this simple and quick operation, you will only need a sma…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos