Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on the Suzuki SX4

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Timing belt

See other generations:
Video tutorial

Replacing the timing belt on the vehicle is a rather complex operation. Let's detail the steps: first, remove the coolant reservoir, then remove the right front wheel and the right wing.

Access the service belt pulleys from underneath the vehicle and remove them, as well as the water pump. Next, remove the timing belt protection cover.

At this point, you need to remove the two tensioners and be very careful to mark the relative positions of the crankshaft and camshaft pulleys with a marker, as this is crucial for maintaining the correct engine timing. Now, position the new belt and proceed to reassemble all components in reverse order.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to replace the timing belt on the Suzuki SX4?
How to replace the timing belt on the Suzuki SX4?
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) You can replace the timing belt on the Suzuki SX4 by lifting the car and completely removing the front right wheel, along with the corresponding whee…
Timing Belt Replacement Suzuki SX4 2.0L Diesel
Timing Belt Replacement Suzuki SX4 2.0L Diesel
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) In this video tutorial, you will learn how to remove and replace the timing belt and tensioner on a Suzuki SX4 2.0L Diesel. First, lift the vehicle a…
What is the replacement interval for the timing belt on the Suzuki Sx4
What is the replacement interval for the timing belt on the Suzuki Sx4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) The timing belt is a toothed rubber strip that transmits the movement from the crankshaft to the camshafts, which control the opening and closing of …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos