Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Light Bulbs in a Suzuki Grand Vitara?

Model: Suzuki Grand Vitara MK 2 - Years 2005-2015
Part: Headlight bulb

To replace the position light bulbs in the Suzuki Grand Vitara, you need to remove the bumper to gain more working space; follow this tutorial. Start by unfastening the plastic rivets of the front grille and remove it, then unscrew the fixing screws of the bumper underneath it. Proceed by unscrewing the additional screws in the wheel arches and those at the bottom of the bumper, then remove the bumper and lay it on the ground. At this point, you can unscrew the fixing screws of the headlights using a 10mm socket and replace the relevant bulbs, which are located at the outer lower part of the unit.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulbs of the Suzuki Grand Vitara 2
How to Replace the Rear Light Bulbs of the Suzuki Grand Vitara 2
Suzuki Grand Vitara (2005-2015 / MK 2) Today, in this video tutorial, you will see how to dismantle and replace the bulbs of the rear light, particularly the stop light, of the Suzuki Gran…
How to Replace the Rear Bulbs on the Suzuki Grand Vitara?
How to Replace the Rear Bulbs on the Suzuki Grand Vitara?
Suzuki Grand Vitara (2015-2024 / MK 3) To replace one or more bulbs in the rear light of the Suzuki Grand Vitara, first open the boot. This will allow access to the two screws holding the …
How to Replace the Front Position Light Bulbs on the Suzuki Grand Vitara
How to Replace the Front Position Light Bulbs on the Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) This guide shows how to replace the front position light bulbs on the Suzuki Grand Vitara. No specific tools are required for this operation except f…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos