Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil on Suzuki Kizashi

Model: Suzuki Kizashi MK 1 - Years 2010-2016
Part: Checks and maintenance

In this video tutorial, you can see how to perform an engine oil change on a Suzuki Kizashi. You do not need many tools for this task. Purchase SAE 5W-30 engine oil and an oil filter, then you will need a 14 mm spanner and a screwdriver to remove the 10 mm screws. The first step is to lift the passenger side with a hydraulic jack and place safety stands. Next, remove the lower splash guard, only taking off the one on the passenger side using the screwdriver. Once the splash guard is removed, position a container under the car to collect the used oil. Now, remove the oil cap with the 14 mm spanner and wait for all the oil to drain into the container. When all the oil has drained, replace the cap without over-tightening; then replace the oil filter. Lower the car and top up with SAE 5W-30 engine oil.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Suzuki Kizashi
How to Reset the Oil Light on the Suzuki Kizashi
Suzuki Kizashi (2010-2016 / MK 1) In this new mini guide dedicated to the Suzuki Kizashi, you will learn a very simple and safe method to reset the engine oil change light in just a f…
Where is the fuse box of the Suzuki Kizashi located?
Where is the fuse box of the Suzuki Kizashi located?
Suzuki Kizashi (2010-2016 / MK 1) In this new guide, we will help you find the fuse box inside your Suzuki Kizashi in just a few seconds. All you have to do is go inside the vehicle a…
How to Remove the Front Seat of the Suzuki Kizashi - Maruti Kizashi
How to Remove the Front Seat of the Suzuki Kizashi - Maruti Kizashi
Suzuki Kizashi (2010-2016 / MK 1) This guide outlines the steps necessary to remove and replace the front seat of the Suzuki Kizashi, as well as the Maruti Kizashi. First, open the fr…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos