Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Original Stereo from a Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Car stereo

Want to remove the original stereo from a Toyota Yaris? Follow these steps for proper disassembly. First, remove the side plastics around the air conditioning control panel using a trim tool. Then, using a screwdriver, unscrew the screws located at the corners of the stereo. Now, pull the stereo out from the dashboard, disconnect the various power connectors at the back, and the antenna reception cable. Extract the unit from its slot. To reassemble the various removed parts, proceed in reverse order.

Updated on 28 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Air Conditioning Knobs and Stereo from a Toyota Yaris
How to Remove the Air Conditioning Knobs and Stereo from a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) How to remove the air conditioning knobs and stereo from your Toyota Yaris and don’t know how to do it? In this video, we will show you how to remove…
Replace Car Stereo on Toyota Yaris
Replace Car Stereo on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Is the car stereo damaged or do you simply want to replace it? Here’s how to remove the stereo on a second-generation Yaris. Remove the trim panel at…
Removing the Car Radio from a Toyota Yaris 1
Removing the Car Radio from a Toyota Yaris 1
Toyota Yaris (1999-2005 / Xp10) In this video, see the instructions for removing the original car radio from a first series Toyota Yaris, following these simple steps. First, get in…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2011-2019 - Why does the Toyota Yaris car radio not work? Read answer
    • Yaris 2005-2011 - How much does an AUX cable cost for the 2006 Toyota Yaris? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos