Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the alternator belt in the Toyota Avensis?

Model: Toyota Avensis T270, MK 3 - Years 2009-2018
Part: V-belt

In this tutorial we can see how to replace the alternator belt in the Toyota Avensis, an extremely simple and quick operation. First of all, make sure that the engine is cool enough, then open the hood and remove the plastic cover. Then loosen the fixing bolts of both the alternator and the belt tensioner bracket with a 12mm socket wrench, unscrew the nut of the tensioner itself and, once the tension is released, remove the old belt. At this point, position the replacement following the correct pattern and tighten all the various bolts and nuts.

Posted on 26 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Alternator of the Toyota Avensis
How to Remove and Replace the Alternator of the Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) Today's instructions will show you the main steps to remove and replace the alternator of the Toyota Avensis. First, raise the vehicle and remove the…
How to Replace the Alternator on a Toyota Avensis
How to Replace the Alternator on a Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) Today, follow this guide to remove and replace the alternator on a Toyota Avensis. First, open the bonnet of your car and disconnect the battery. The…
Changing the Alternator on a Toyota Avensis
Changing the Alternator on a Toyota Avensis
Toyota Avensis (2003-2008 / T250, MK 2) How to replace the alternator on a Toyota Avensis? Start by removing the car battery from its designated compartment, then lift the bonnet. Unscrew t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos