Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Toyota Verso?

Model: Toyota Verso MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

To completely turn off the Service light that is shown on the instrument panel of the Toyota Verso, you need to press and hold the button located at the bottom of the central display on the dashboard: continue to hold it down, then you can insert the ignition key into the ignition switch and turn it to start the engine.

You will need to keep holding the button until the Service light disappears completely; after resetting the light, you can release the button and then finish the procedure by turning off the instrument panel.


Posted on 8 February 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Toyota Verso?
How to Reset the Service Light on a Toyota Verso?
Toyota Verso (2009-2018 / MK 4) To reset the Service light on a Toyota Verso, turn on the ignition and press the button located on the right side until "Trip A" appears on the displ…
How to Reset the Service Light on a Toyota Verso?
How to Reset the Service Light on a Toyota Verso?
Toyota Verso (2009-2018 / MK 4) To reset the Service light on a Toyota Verso, press and hold the button located on the left side of the instrument cluster while it is off. While hol…
How to reset the Service light on a Toyota Verso?
How to reset the Service light on a Toyota Verso?
Toyota Verso (2009-2018 / MK 4) To reset the Service light on a Toyota Verso, turn the ignition on without starting the engine by rotating the key. Once the dashboard is lit up, pre…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos