Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light bulb on a Toyota Corolla

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fog lights

See other generations:
Video tutorial

In today's video, we will see how to replace the fog light bulb (H11) on a third-generation Toyota Corolla. First, we go under the engine compartment to remove the plastic cover.

To do this, we need to unscrew the two fixing screws with a 10mm wrench and the plastic clip with a flathead screwdriver as shown in the video. Once done, we will immediately have access to the bulb to be replaced.

So, we grab the bulb and rotate it counterclockwise a quarter turn to remove it from its socket. Finally, we disconnect the connector from the bulb and insert a new bulb following the reverse procedure.


Posted on 28 February 2025 by ScegliAuto


Related tutorials

How to replace the front fog light bulbs of the Toyota Corolla.
How to replace the front fog light bulbs of the Toyota Corolla.
Toyota Corolla (2013-2019 / E160, E170, MK 4) The instructions provided in this guide will show us how to disassemble and replace the front fog light bulbs of the Toyota Corolla. First, let's mov…
How to replace the headlight bulb of the Toyota Corolla
How to replace the headlight bulb of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Replacing the front headlight bulb of your new Toyota Corolla is really very simple. To complete the operation in question, just read the following g…
How to Replace the Fog Light Bulbs in the Toyota Corolla?
How to Replace the Fog Light Bulbs in the Toyota Corolla?
Toyota Corolla (2013-2019 / E160, E170, MK 4) In this tutorial, we will see how to replace the fog light bulbs in the Toyota Corolla, an extremely simple and quick operation. First, ensure that t…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos